CS-SR3超塑化劑系列
低水灰比、高強、長坍落度保持的預拌混凝土
用高性能聚羧酸系減水劑
SUPERPLASTICIZER SERIES
CS-SR3
High-performance Polycarboxylate Superplasticizer for Ready-Mixed Concrete with
Low Water-Cement Ratio, Excellent Mechanical Performance and Long Slump Retention
產品描述
超塑化劑CS-SR3是一種專為預拌混凝土工業設計的高性能聚羧酸系高效減水劑,能有效地延長混凝土的凝結時間,保持坍落度,而且不影響早期和后期強度的發展。
超塑化劑CS-SR3與傳統的由甲醛、萘磺酸縮聚而成的萘系和木質素磺酸鹽減水劑是完全不同的,是一種新的完全不含甲醛的高性能聚羧酸系高效減水劑。與傳統的萘系或三聚氰胺類高效減水劑以及第一代丙烯酸鹽減水劑相比,超塑化劑CS-SR3在減水作用、延長凝結時間和坍落度保持性等方面具有更優異的性能。
DESCRIPTION
CS-SR3 is a high performance polycarboxylate water-reducing admixture designed specifically for ready-mixed concrete industry.
CS-SR3 can efficiently prolong time of setting, hold slump constant and not influence the compressive performance developing of concrete at early and later ages.
The superplasticizer CS-SR3 is completely different from traditional formaldehyde or lignosulphonate based water-reducing admixtures.CS-SR3 is a new kind of high performance polycarboxylate water-reducing admixture without any formaldehyde. Superior to the earlier generation of acrylic-based copolymers, traditional melamine and naphthalene-sulphonate based water-reducing admixture,
CS-SR3 offers high efficiency in the areas of water reduction, setting time retarding, slump retention.
應用領域
應用超塑化劑CS-SR3的混凝土具有較高的工作度和較大的減水率,在新拌階段易于施工,硬化后具有優異的力學性能。
超塑化劑CS-SR3尤其適用于水泥用量大于300kg/m 預拌混凝土,以及其他需要高減水作用和很好的坍落度保持性的場合。由于既可以確保工作度,又不降低早期強度,超塑化劑CS-SR3特別適用于生產自密實混凝土。
超塑化劑CS-SR3的主要應用領域:
- 高力學性能與高坍落度保持的預拌混凝土;
- 高溫或長時間運輸條件下,高力學性能和高工作度保持的新拌混凝土;
- 強度等級達到25-70MPa以上;
- 設計防水、高耐久的混凝土工程;
- 大體積混凝土;
- 自密實混凝土;
- 其高流動性與抗離析的特征使它也適合于快速澆注混凝土工程。
WHERE TO USE
Concrete incorporated CS-SR3 has good workability and high water-reducing rate, easy to construct when freshly mixed and yielding excellent mechanical performance after hardening.
CS-SR3 is particularly ideal for ready-mixed concrete with cement amount higher than 300kg/ m³ and other places where high water reduction is needed and good slump ability should be obtained.
With results of good workability, excellent mechanical strength at early stages, CS-SR3 is particularly ideal for self-compacting concrete.
Main application fields of CS-SR3 are as follows:
- Ready-mixed concrete with high slump retention and high mechanical performance ;
- Fresh concrete requires high mechanical performance and prolonged workability in high temperature or in long time transportation;
- Concrete with strength grade from 25 to 70MPa;
- Waterproofing and high durable concrete;
- For massive concrete;
- Self-compacting concrete;
- For fast casting concrete project benefits from its high flowing ability and bleeding resistance;
技術特性
超塑化劑CS-SR3是高性能聚羧酸系水溶液,此減水劑可有效地分散水泥顆粒,并延緩混凝土中水泥水化反應,延長凝結時間,降低工作度損失。
超塑化劑CS-SR3的技術特性主要表現為以下幾點:
- 保持相同工作度時,可減少用水量。增進強度,降低滲透性,并提高耐久性;
- 相同水灰比下,增大工作度;
- 降低水泥水化反應速度,延長混凝土凝結時間,降低新拌混凝土工作度損失;
- 在相同水灰比與工作度下,減少用水量與水泥用量。其技術優勢為低收縮﹑低徐變與低水化放熱率。
由此,根據超塑化劑CS-SR3的摻量變化(水泥重量的0.5%~1.5%),混凝土能夠達到改善工作度,延長凝結時間,長坍落度保持,降低水泥用量等目的。
TECHNICAL CHARACTERISTICS
CS-SR3 consists of a water solution containing acrylic copolymers which can efficiently disperse the cement particles and retard cement hydration of concrete and thus prolong the setting time and decrease loss of workability.
The dispersing ability of CS-SR3 can be used in the following four methods:
- To reduce the amount of water while maintaining the same workability (in this manner, it is possible to increase the mechanical strength of concrete, reduce permeability, and increase durability);
- To increase the workability while maintaining the same water-cement ratio;
- To decrease the hydration velocity of cement, prolong the setting time of concrete, decrease the workability loss of fresh concrete;
- To reduce both the water and the cement content while maintaining the same water-cement ratio and the same workability. Its technical predominance are low shrinkage,low creep and low heat release rate in hydration.
Thus, by adjusting the dosage of CS-SR3 (0.5%-1.5% by weight of cement), the desired properties such as workability, prolonged time of setting, slump retention and decreased cement use of concrete can be obtained.
摻加方法
與傳統外加劑(萘系或木質素磺酸鹽)越晚摻入,對水泥顆粒的分散效果越好相比,超塑化劑CS-SR3與拌合水一起加入混凝土(同摻法)就能達到最佳的分散效果。
DIRECTIONS FOR USE
Unlike traditional admixtures(such as Naphthalene,Lignosulphonate etc.).whose dispersal action is most efficient when the addition of the mixtures to the mix is postponed.CS-SR3 always develops its maximum dispersal action whenever it is introduced into the concrete(at the start or at the end of the addition of the mixing water).
與其他產品的相容性
超塑化劑CS-SR3與本公司的其他產品是相容的,如因特殊用途需加入特殊外加劑,請向公司技術部門查詢。
COMPATIBILITY
CS-SR3 is compatible with other CS Chemical products. Our Technical Team is available to provide evaluation and solution to your queries.
CS-SR3技術參數 |
產品特征 |
狀態 液體 |
顏色 琥珀色 |
密度(kg/L) +20℃時為1.05±0.02
1.07±0.02
1.09±0.02 |
固含量 (%) 22±2
25±2
29±2 |
具體作用 增大工作度,減少拌合水,延長凝結時間,長坍落度保持 |
分類 緩凝型高性能聚羧酸系減水劑 |
氯離子含量(%) < 0.01 |
堿含量(%) < 0.1 |
存放 原包裝不開封可存放12個月,注意防凍。 |
健康危害性 無 |
CS-SR3 TECHNICAL SPECIFICATIONS |
PRODUCT INFORMATION |
Consistency Liquid |
Color Amber |
Specific Gravity (kg/L) 1.05±0.02
1.07±0.02 at +20℃
1.09±0.02 |
Active Product (%) 22±2
25±2
29±2 |
Specific Usage Increase workability and/or reduce mixing water ,retard cement hydration and slump retention over long period. |
Classification Retarding highly efficient polycarboxylate
water-reducing admixture |
Chloride Content (%) <0.01 |
Alkali Content (%) <0.1 |
Storage 12 months, Keep the product away from frost and avoid direct
exposure to sunlight |
Hazard Classification None |
在混凝土中的性能 (CS-SR3 摻 量0.8%) 固含量 (%) 29 |
技術指標
檢測項目(單位) 一等品 合格品 檢驗結果 |
減水率(%) ≥12 ≥10 28 |
泌水率比 (%) ≤100 38 |
含氣量 (%) <5.5 2.6 |
凝結時間差 (min) 初凝 > +90 +169
終凝 +183 |
抗壓強度比 (%) 3-days ≥100 169
7-days ≥110 155
28-days ≥110 ≥105 140 |
28d收縮率比 (%) ≤135 106 |
對鋼筋銹蝕作用 對鋼筋銹蝕有無銹蝕危害 對鋼筋銹蝕無銹蝕危害 |
PERFORMANCE DATA (0.8% DOSAGE OF CS-SR3) Active Product (%) 29 |
Properties Standard Index (GB8076-1997) CS-SR3 Test Results
First Grade Standard Grade |
Water Reduction (%) ≥12 ≥10 28 |
Bleeding rate (%) ≤100 38 |
Air content (%) <5.5 2.6 |
Difference in Initial > +90 +169
Setting Time (min) Final +183 |
Rate of Strength(%) 3-days ≥100 169
7-days ≥110 155
28-days ≥110 ≥105 140 |
Shrinkage Rate of 28 days (%) ≤135 106 |
Corrosion to Steel None None |
用量
質量摻量每100公斤水泥0.5~1.5kg。
DOSAGE
From 0.5 to 1.5kg per 100kg of cement.
包裝
200升桶裝,1000升罐裝,亦可散裝。
PACKAGING
CS-SR3 is available in 200 liters/barrel, in 1000 liters/tank, and also available in bulk.
儲存
密封容器中儲存,防止霜凍或在陽光下直接暴曬。
STORAGE
Store in sealed containers, protect from frost and avoid direct exposure to sunlight.
注意
本報告中的技術細節和建議都基于我們多年積累的知識和經驗,它們只適用于一般情況,具體情況下的使用應在長期實踐中的進行驗證?;谶@個原因,任何有意使用本產品的人都應在使用前確保本產品在預期情況下的適用性。在任何情況下使用者自己應對使用本產品的后果負責。如有技術問題請向淘正化工在本地的分銷商咨詢,或直接與淘正化工技術服務部聯系。