REIT RT9A Concrete Block Automatic Production Line
Technical Specification
Pos.1 Stationary block machine REIT RTQT9
固定式瑞圖RTQT9型混凝土砌塊成型機
Pallet size棧板尺寸 : 1350 × 700 ×14 mm（鋼質Steel）
Minimum product height產品最小高度 : 50 mm
Maximum product height產品最大高度 : 300 mm
Work area 成型面積 :1250 ×640mm
Operation Cycle 成型周期 :15-25s(depend on the products)
Capacity/per Pallet 成型數量 :9 hollow blocks 400×200×200mm
Vibration Motor振動電機 :2×7.5kw
Up Mould Vibration Motor 上模振動電機 :2×1.1kw
The power of hydraulic station
液壓站驅動功率 :30kw
The rated pressure of hydraulic station
液壓站額定壓力 :16MPa
Machine weight 設備自重 :app 10 ton
Machine weight including 2nd feeding device帶面料: app 12 ton
The block machine can be universally used for the manufacturing of pavers with and without face mix, kerbstones, hollow blocks and similar elements
混凝土砌塊成型機可以生產各種彩色鋪地磚、空心砌塊、路沿石等多種混凝土制品。
Body. The machine is built of strong section steel with 4 guiding columns. Height adjustment of feed table is made through a hand winch. The capacity of the base concrete storage hopper is approx.1000L without the hopper extension. The hopper outlet is operated by hydraulic cylinder. The up and down move of mould is driven by hydraulic. The seat of mould head is equipped with synchronized connecting rod so that both sides of two end of mould is up and down synchronously and reduce the ware between sleeves and columns.
機架成型機采用高強度鋼結構，4根導向柱。布料臺的高度可調，不加延伸部分的料倉容積為1000升。料倉門由液壓缸驅動。上下模箱的運動由液壓缸驅動，上模座裝有同步連桿機構，確保兩端同步升降，減少導套和立柱的磨損。
Filler box. The filler box is driven by twin-cylinders and synchronous connecting rod drives two arm of both side of box. In the filler box a hydraulic motor driven shaker is equipped so that the filling process is fast and wet concrete in the mould is well-distributed.
布料裝置 布料盒采用雙油缸驅動，同步連桿同時帶動兩側前后運動，布料時運動平穩，無撞擊，機件磨損小，不易漏料。布料裝置裝備有液壓馬達驅動的快速布料機構，布料更快、更均勻。
The compacting system consists of two twin-shaft heavy-duty special synchronous vibrators fixed on vibrating table, the vibrator having 2 synchronized unbalances and generating vertical oscillations. Due to this force the vibrating table, the pallet and the mould filled with concrete, move up and down. The pallet forced limited supports is designed. The pallet hits the limited supports while moving down. This shock increases the vibrating force working on the concrete and finally causes the compaction of the blocks. Amplitude of the vibrating table is controlled. Because of the limited supports the life of isolation rubber bush is prolong.
振動系統 采用兩個雙軸自同步式振動器的振動臺。每個振動器由兩組反向同步旋轉偏心塊組成。振動器產生的振動為垂直振動，砌塊成型的激振力由振動器產生。棧板和充滿物料的模具在此振動力的作用下上下運動。設計上增加了棧板的強制限位支撐，當向下運動時，棧板沖擊限位支撐，沖擊使激振力倍增，最終形成對砌塊的振動壓力。振動臺的振幅可獲得控制。這種方式可降低振動臺隔振墊的疲勞損壞。
Pallet centering and positioning device It is hydraulic driven device. It can center and position the pallet on the vibrating table.
棧板對中和定位裝置 增加了液壓驅動的棧板自動對中和定位裝置，確保成型時棧板位置準確，提高棧板的有效工作面積，避免了因棧板“漂移”對制品質量的影響。
Mould exchange device It is the auxiliary device for mould exchange and shorter the time of mould exchange .
快速換模裝置 換模時間僅為原來的1/3，減少了人力，同時大大降低了換模過程對人員和設備損傷的機率。
The hydraulic drive unit, consisting of a large-sized oil tank, oil pump, electric motor and cooling fan, is installed together with the valve station beside of the block machine, which is separated with block machine and linked with soft heavy duty hydraulic pipes.
One Oil Pump is duplex one driven by 30kw motor, Japanese Yuken brand;
Valves are Japanese Yuken brand;
Hydraulic cylinders are Uranus products;
液壓站 包括大容量油箱、液壓泵、驅動電機和各種閥等集成安裝在成型機旁。液壓站獨立于成型機，并與成型機用高強度液壓管連接。
日本油研公司雙聯葉片泵，由30kw 電機驅動；
日本油研公司液壓閥；
優瑞納斯公司的液壓缸。
Facing concrete device (2nd feeding device)
面料裝置
It is for the manufacturing of products consisting of face concrete. The height of feed table with feed box is adjustable. Concrete storage hopper is 600L and its gate is operated by hydraulic cylinder. Filler box is driven by twin-cylinders and synchronous connecting rod drives two arm of both side of box.
For mould exchange and maintenance the 2nd feeding device is moved away from the block machine.
面料裝置用于生產帶面料的制品。布料盒及布料臺高度可調。料倉容積600L，料倉門的開啟關閉由液壓缸驅動。布料盒采用雙油缸驅動，同步連桿同時帶動兩側前后運動。當更換模具或維修設備時，可將面料裝置移離成型主機。
PLC control
PLC控制系統
Including power panel, control desk, monitor display and PC computer, the PLC control system has friend interface, data input and output, diagram display. The system can record production data and operation data. The English version of operation system is supplied.
控制系統包括電控柜、控制臺，顯示器和電腦。 控制系統具有良好的人機界面、數據輸入輸出功能、圖形顯示系統?？刂葡到y(tǒng)可存儲生產數據和操作數據?？商峁┯⑽牟僮鹘缑妗?/FONT>
The PLC itself is a Siemens product, S7. Other elements are from famous international company like Omron, ABB
PLC采用西門子公司產品。其它電子產品選用國際知名公司產品如歐姆龍、ABB。
Pos.2 Green block conveyor
濕產品輸送機
As transport equipment on manufacturing wet side, designed for smooth transportation, driven by frequency controlled motor
Driven motor :2.2kw
Transport speed : 0.1—1m/s
濕邊產品的輸送裝置，將濕產品平穩的送到升板機下。由變頻調速電機驅動。
電機功率：2.2kw
運行速度: 0.1—0.6m/s
Pos.3 Rotating brush for green block
濕產品刷
Installed above Pos.2 conveyor for clean of the fresh products
Driven motor: 0.75kw
用于清潔濕產品的表面。
電機功率：0.75kw
Pos.4 Chain elevator
升板機
It is for left the pallet with green blocks to certain position. Frame is sectional steel design with two lateral safety grids. Supporting angles are fixed on bush roller chains. The Reit patent synchronous device driven by electric brake motor is equipped.
用于將帶濕產品的棧板逐層提升至規定高度。采用型鋼焊接的框架結構，兩側有安全護網，帶支撐掛耳固定在鏈條上。采用瑞圖專利同步技術，提升機構由制動電機驅動。
max. loading capacity :9000kg
stages no. : 12
stage distance :381mm
pallets per stage : 2
motor : 7.5kW
travel speed:0.1m/s
最大載荷：9噸
提升層數：12層
層間距：381mm
每層棧板數：2
電機功率：7.5kw
提升速度: 0.1m/s
Pos.5 Finger car
子母車
It is used for the transport of the pallets with fresh products from the chain elevator to the curing racks or chambers and for returning the cured products to the chain lowerator.
從升板機內將帶濕產品的棧板送入養護窯，然后將帶養護好產品的棧板送入降板機內。
max. loading capacity :9000kg
stages no.: 12
stage distance :381mm
pallets per stage : 2
pressure of hydraulic system:8MPa
最大載荷：9噸
提升層數：12層
層間距：381mm
每層棧板數：2
液壓系統壓力:8MPa
The finger car assembly consists of:
Platform car: welded heavy duty steel frame with large flanged wheels and locking device. Driven by 7.5 kW frequency controlled brake motor manufactured by SEW.
Finger car: With lifting frame and attached forks driven by hydraulic cylinder. Driven by 5.5kW frequency controlled brake motor manufactured by SEW.
子母車包括：
母車：重型焊接鋼結構，大型法蘭輪組，電機驅動的定位鎖緊裝置。由7.5kw的SEW變頻調速驅動電機驅動。
子車：框架式升降叉架由液壓缸驅動。由5.5kw的SEW變頻調速驅動電機驅動。
Pos. 6 Chain lowerator
降板機
The same technical data as chain elevator, which is lowerate the pallet with the cured products.
與升板機的技術性能一樣，只是運轉方向相反，用于將養護好的產品降下進行碼垛。
Pos.7 Dry block conveyor
節距輸送機
It is a fixed distance pawls advance device as transport system on the manufacturing dry side. Driven by 3kW gear motor. The manufacturer of motor is Huangyan Motor Plant.
以固定節距把干產品輸送到碼垛機下。3kW電機驅動。電機是浙江黃巖電機廠的產品。
Pos.8 Auto cuber
全自動碼垛機
For taking off the cured products from the return conveying system and to build block cubes on the adjoining transport system.
Lifting capacity: 650kg
Executive cubing height: 1200mm
Cubing layer:6-20 layer
Pressure of hydraulic station: 12MPa
Motor of hydraulic pump: 18.5kw
Lifting stroke: 1500mm
Portal frame is in welded design. The lifting frame column with hydraulically operated lifting device. At the end of the lifting device a rotating device is attached, which is driven by motor. The 4-sided product clamp is operated hydraulically.
Complete with hydraulic station, placed beside the cuber including oil cooler and oil heating.
將由輸送系統轉運過來的已經養護好的產品進行整理碼垛。
提升重量：650kg
有效碼垛高度：1200mm
碼垛層數：6-20層
液壓壓力：12MPa
液壓泵功率：18.5kw
最大提升行程：1500mm
橋式支撐框架結構，碼垛頭為4柱框架結構，碼垛頭的提升裝置為液壓驅動。碼垛頭為四面對產品夾緊，其旋轉為電機驅動。四面夾緊裝置液壓缸驅動。液壓站位于碼垛機的旁邊，帶有冷卻和加熱裝置。
Pos.9 Pallet cleaning brush
棧板刷
It is rotating brush to clean pallets driven by 0.75kw motor.
用于清潔棧板表面。由0.75kw電機驅動。
Pos.10 Pallet turning device
棧板翻轉裝置
It is for turning the empty and cleaned pallets driven by 0.75kw motor.
用于將空棧板翻轉。由0.75kw電機驅動。
Pos.11 Scrapper for steel pallets
鋼棧板清潔裝置。
It is a scrapper to clean the face of steel pallets. It is equipped with wear resistance blade.
用于清潔鋼棧板的表面。帶有耐磨刀刃。
Pos.12 Pallet Cross transfer device
棧板轉送裝置
It is designed as fixed distance pawls advance device as pallet return system to pallet magazine of the block machine.
以固定節距將空棧扳回送到成型機后的棧板倉內。
Drive motor :3kw
電機功率：3kw
Pos.13 Pallet hopper
棧板倉
It is designed to store 3 pallets.
用于儲存3塊棧板。
Pos.14 Pallet oil device
棧板浸油裝置
It is designed form oiling the empty pallet.
用于給棧板上油。
Pos.15 Product pallet magazine
貨盤倉
It is designed for store the product pallet and timed placing the pallet on the slat conveyor.
貨盤倉用于存放堆放成品的貨盤，貨盤倉位于成品輸送機的上面。
Pos. 16 Slat conveyor
成品輸送機
It is for transporting and storing cubed blocks.
Driven motor: about 11kw with frequency control system.
Lengths: about 17m
The conveyor consists of a frame with transversal connections, the transporting chain with supports and the drive unit.
用于傳送和堆放已碼垛的產品。
電機功率：約11kw 帶變頻調速。
長度: 約17m
包括：支架、傳送鏈及支撐、驅動機構。
Pos. 17 Mixing and Batching plant
配料攪拌站
17.1 Aggregate hoppers (for base concrete)
骨料倉(底料)
3×12m3
17.2 Weigh batching belt (for base concrete)
稱重皮帶（底料）
Weighing capacity稱重能力: 1000kg
Dynamic accuracy稱重精度: ±2%
Driven motor驅動電機功率: 5.5kw
Effective transport capacity有效輸送量: 300ton/h
17.3 Aggregate skip hoister (for base concrete)
骨料提升機（底料）
It is for transport the batching aggregate to the mixer.
將稱重好的骨料送入攪拌機內。
Hopper提升斗: 1500L
Driven motor驅動電機: 7.5kw
17.4 2 cement silos (for base mixer) (customer makes locally, free charge of us)
2 套水泥筒倉(用于底料攪拌機)
The cement silos are 60 tons per silo with air pad, support, level indicator and dust collector. They are to be supplied in semi-assembled to be welded at the buyer job site. The diameter is 2800mm. The total height is about 17m.
每個筒倉60噸。帶有環吹破拱裝置、支腿、料位計和收塵裝置。筒倉為半成品，在買方在現場焊接。筒倉直徑為2800mm，總高度約為17m.
17.5 2 cements screws( for base mixer)
2 套螺旋輸送機(用于底料攪拌機)
Technical data技術參數:
Diameter直徑: 168mm
Conveying length approx.長度約: 7000mm
Driven motor驅動電機: 4kw
Capacity輸送能力: 20ton/h
17.6 Cement weigh batcher for base mixer
底料水泥稱重倉
Weighing capacity稱重能力: 750kg
Hopper volume稱重倉容積:1000L
Dynamic accuracy稱重精度: ±2%
Weighing hopper is lodged on 3 load cells. The amplifier, feeding device with dust collar, magnetic vibrator, pneumatically operated throttle valve shutter are included.
稱重倉帶有3個傳感器。系統包括：放大器、進料裝置和收塵包、振動器、放料氣閥。
17.7 Aggregate hoppers (for face concrete)
骨料倉(面料)
1×12m3
17.8 Weigh batching belt (for face concrete)
稱重皮帶（面料）
Weighing capacity稱重能力: 500kg
Dynamic accuracy稱重精度: ±2%
Driven motor驅動電機功率: 4kW
Effective transport capacity有效輸送量: 300ton/h
17.9 Aggregate skip hoister（For face concrete）
骨料提升機（面料）
It is for transport the batching aggregate to the mixer.
將稱重好的骨料送入攪拌機內。
Hopper提升斗: 900L
Driven motor驅動電機: 2.2kw
17.10 2 Planetary mixers (one for base concrete, one for face concrete)
2 個立式行星攪拌機(1套用于底料攪拌，另1套用于面料攪拌)
Base mix底料攪拌機: Planetary mixer立式行星攪拌機JN1000
Technical data技術參數:
Loading capacity進料:1500L
Compacted concrete per batch出料: 1000 L
Stars no.行星: 1
Power電機功率: 45kw
Face mix面料攪拌機: Planetary mixer立式行星攪拌機 JN250
Technical data技術參數:
Loading capacity進料: 375 L
Compacted concrete per batch出料: 250 L
Stars no.行星: 1
Power電機功率: 7.5kw
Mixer features 攪拌機特性:
Interchangeable wear resistance linings, Reversible mixing blades, Water distribution ring with spray nozzles, Inspection covers for easy cleaning and maintenance.
可通用的耐磨襯板，可翻轉的攪拌葉片。注水噴嘴分布在環形水管上，檢查孔方便檢查和維修。
17.11 Mixer platform
攪拌平臺
For the JN1000 and JN250 mixers.
支撐JN1000和JN250攪拌機。
17.12 2 wet concrete conveying belts
2 套出料皮帶
For the transport of the base and face mix from the mixer to the storage hoppers of block machine.
用于將攪拌好的底料和面料送入成型機的底料倉和面料倉。
Driven motor驅動電機功率: 5.5kw
17.13 2 Supports of the wet concrete conveying belt.
2 套出料皮帶的支撐架
17.14 Water metering and moisture measurement
注水與測濕系統
Hydronix moisture measurement by microwave is equipped for two mixers, one microwave sensor inside of each mixer. Two micro-water-pump is used to metering the water into mixers. Control computer for the fully automatic water dosing for 2 mixers.
每個攪拌機都裝備有Hydronix微波測濕儀，微波測濕探頭安裝在攪拌機內。通過微型水泵進行注水。電腦對2個攪拌機的測濕和注水進行全自動的控制。
Pos.18 Electric control group
電器控制系統
The electric control group includes five parts: for mixing and batching, for block machine, for finger car, for cuber and transport system.
The Siemens Siematic S 7 PLC and the power unit is housed in a control desk which includes joy-sticks for manual machine operation and an integrated Siemens display for data in- and output as well as error diagnosis system. Colour monitor is equipped with friend interface and diagram display. The control group is linked through PC computer.
電控系統包括5個控制單元：配料攪拌、成型機、子母車、碼垛機和輸送系統。
采用西門子Siematic S7 PLC可編程控制系統，與電源系統一齊集成在控制柜中，控制柜配有各種控制按鈕和西門子顯示裝置，配備有彩色顯示屏，具有良好的人機界面和圖形顯示。通過界面實現數據的輸入輸出。各控制單元通過計算機集成。具有故障診斷功能。
18.1 Electric control for mixing and batching
配料攪拌系統的控制
Automatically control base and face concrete batching and weighing, water metering and moisture measuring, mixing and transporting to block machine.
自動控制底料和面料的配料稱重、測濕注水、攪拌和輸送到成型機。
18.2 Electric control for block machine
成型機的控制
Referring to Pos.1. 參見工位1。
18.3 Electric control for the finger car
子母車的全自動控制
The Siemens Siematic S 7 PLC and the power unit is integrated into a control desk which includes joy-sticks for manual machine operation and a Siemens digital display for data in- and output as well as error diagnosis system.
采用西門子的Siematic S 7 PLC，PLC和動力單元等均安裝在獨立電控柜中，電控柜上由各種按鈕和控制手柄用于手動操作。西門子控制顯示系統可進行數據的輸入和輸出，并帶有故障診斷功能。
18.4 Electric control for cuber.
碼垛機的控制系統
The Cuber, including Slat Conveyor and Product Pallet Magazine, is controlled by the Siemens Siematic S 7 PLC. The control desk includes joy-sticks for manual machine operation and a Siemens digital display for data in-put and out-put as well as error diagnosis system.
碼垛機（包括成品輸送機和貨盤倉）由西門子的Siematic S 7 PLC控制。電控柜上有各種按鈕和控制手柄用于手動操作。西門子控制顯示系統可進行數據的輸入和輸出，并帶有故障診斷功能。
18.5 Electric control for transport system
輸送系統的控制系統
For the control of: Green block belt conveyor, Rotate brush, Chain elevator, Chain lowerator, Dry block conveyor, Pallet cleaning brush, Pallet turning device, Pallet cross transfer device, Pallet hopper and Pallet oiling device，Pallet scraper
用于控制：濕產品輸送機、產品刷、升板機、降板機、節距輸送機、棧板刷、棧板翻轉裝置、棧板轉送裝置、棧板倉、棧板浸油裝置和棧板清潔裝置。
